Best Sellers

Showing all 15 results

• 

  AVR SX460 | Generic Replacement

  Features include:
  • Stability adjustment
  • Under frequency roll off adjustment
  • INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
  • OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
  • Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
  • Unit power dissipation: 10 watts maximum - Build up voltage：4 Volts @ AVR terminals
   

  Call for Quotefor international purchases!

  $20.70
  AVR SX460 | Generic Replacement quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  AVR SE350 | Generic Replacement

  • Output Power - Continuous 73 Vdc at 3.5 Adc (255w) - 1 year warranty
  • Frequency Compensation Adjustable
  • EMI Suppression Internal electromagnetic interference filter (EMI Filter).
  • Roll Off Frequency 54-61 Hz for 60 Hz Operation 45-51 Hz for 50 Hz Operation
  • Storage Temperature -65°C to +85°C
     

  Call for Quotefor international purchases!

  $28.50
  AVR SE350 | Generic Replacement quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  TPS101GT10-000 | Engine Heater

  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Engine Displacement: 350 CID (5.7 L)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   

  Call for Quotefor international purchases!

  $139.99
  TPS101GT10-000 | Engine Heater quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  TPS151GT10-000 | Engine Heater

  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle)
  • Engine Displacement: 350 – 500 CID (5.7–8.2 L)
  • Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   

  Call for Quotefor international purchases!

  $139.99
  TPS151GT10-000 | Engine Heater quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  MSP6720 | Magnetic Pickup

  3.86 in [98 mm] Thread Length • 1 ft [0.3 m] Harness • Flying Leads • Aluminum Clear Anodized
  • -65 ºF to +255 ºF (-54 ºC to +107 ºC) Operating Temperature
  • Available for hazardous location installation (not certified)
  • Produces electrical frequency
  • Requires no energizing circuit from control
  • Used on all GAC's electronic speed controllers
   

  Call for Quotefor international purchases!

  $147.99
  MSP6720 | Magnetic Pickup quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  EEG6500 | Digital Speed Control

  Multi-V DC • Built-In Display • Terminal Strip • Gaseous or Diesel • Fixed Speeds or Resistive Variable Speed Input

  • Identical mounting hole pattern to ESD5500E
  • Improved and simplified LCD user interface
  • Fast setup with 5 push buttons, no potentiometers
  • Lockable display to prevent unauthorized access
  • 2 fixed speeds (rated/idle) and variable speed
  • Selectable isochronous or droop governing
  • Built-in fault readout
  • Adjustable starting fuel strategy (black smoke reduction)
  • Speed ramping (idle to rated or any speed setting and transient change)
  • Includes standard GAC AUX input for synchronizing and load sharing
  • SAE J1939 engine data
   

  Call for Quotefor international purchases!

  $405.49
  EEG6500 | Digital Speed Control quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  CB125110-200 | Engine Heater

  • HOTSTART CB125110-200 Engine Heater - Weather-Tight Coolant preheater with Thermostat
  • Replacement to CB1251A3-200
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Engine Displacement: 600 - 800 CID (9.8 - 13.1L)
  • Volts: 120v - kW: 2.5 - AMPS: 20.8 - 60Hz -Single Phase
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   

  Call for Quotefor international purchases!

  $409.99
  CB125110-200 | Engine Heater quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  Original CB125210-200 | Engine Heater

  • HOTSTART CB125210-200 Engine Heater - Weather-Tight Coolant preheater with Thermostat
  • Replacement to CB1252A3-200
  • Preheat Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Engine Displacement: 600 - 800 CID (9.8 - 13.1L)
  • Volts: 240v - kW: 2.5 - AMPS: 10.4 - 60Hz - Single Phase
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
   

  Call for Quotefor international purchases!

  $409.99
  Original CB125210-200 | Engine Heater quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  ALN025 | Actuator

  • Low Cost, Compact Design
  • Fast Response
  • Precise Repeatability
  • Provide a quick response time and can be used for many different applications
  • Completely self-contained
  • Integral return spring returns output shaft to zero fuel position if battery power is lost
  • Operate in any position, are not gravity sensitive
  • Compatible with GAC’s standard speed control units
  • Maintenance Free
  • Requires only a firm mounting surface, appropriate linkage to the fuel control and electrical connection to the speed control unit
   

  Call for Quotefor international purchases!

  $419.99
  ALN025 | Actuator quantity
  Select options This product has multiple variants. The options may be chosen on the product page
  Add to Wishlist

  Add to Wishlist
• 

  ESD5500E Series | Speed Controls

  Multi-V DC • Standard Unit
  • Switchable droop control
  • Adjustable PID
  • Idle speed adjustment
  • Auxiliary accessory inputs
  • Speed ramping
  • Soft coupling

  Call for Quotefor international purchases!

  $432.99
  ESD5500E Series | Speed Controls quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  ADC100 | Actuator

  • Save Energy Cost by regulating the engine speed according to load requirements. GAC components are the best way of governing a generator where strict control of engine speed is desired irrespective of engine load
  • ADC100 - 12 or 24 VDC / Packard Connector without Mating Connector / Includes GA102 | (Stanadyne D Series F.I. Pump / Packard Connector) | ADC100 series provides the function of a fuel shut-off solenoid.
  • High Performance Fuel Control - Maintenance Free Operation - Actuator mounts directly to Stanadyne D Series Pump - No external linkages or brackets required - Faster response than competitive design
  • GAC high performance speed control system are application based and consist of four major components: flywheel, magnetic speed pickup, speed controller and an actuator
  • Application in: Military grade equipment, Rail, Marine, Industrial, Heavy Machinery, Gaseous Engines, Power Generation, Oil & Gas and much more... GAC is ISO 9001 certified | We carry the complete line of Governors America Corp products.
   

  Call for Quotefor international purchases!

  $433.39
  ADC100 | Actuator quantity
  Select options This product has multiple variants. The options may be chosen on the product page
  Add to Wishlist

  Add to Wishlist
• 

  DSE890 | DSEWebNet® Gateway – 4G (GSM)/Ethernet

  • CONTINUOUS VOLTAGE RATING: 8 V to 36 V continuous
  • CRANKING DROPOUTS: Able to survive 0 V for 100 mS, providing supply was at least 8 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries.
  • MAXIMUM OPERATING CURRENT: 755 mA at 12 V / 376 mA at 24 V
  • MAXIMUM STANDBY CURRENT: 207 mA at 12 V / 113 mA at 24 V
  • COMMUNICATIONS: USB A Single DSE Controller
  • CAN: Multiple DSE Controllers & Programmable Displays
  • RS485: Multiple DSE Controllers
  • Ethernet: Multiple DSE Controllers
  • 4G Connectivity.
  • Supports 2G & 3G connections (where available)
  • Configured device can be monitored using DSEWebNet® software
  • Configured device can be monitored using third-party MQTT brokers
  • DIN rail & chassis mount.
  • Multiple users can access each DSE890 MKII simultaneously
  • Main & diversity aerial connection inputs.
   

  Call for Quotefor international purchases!

  $615.99
  DSE890 | DSEWebNet® Gateway - 4G (GSM)/Ethernet quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  DSE7320 MKII | Auto Mains Failure Control Module

  • DC Supply
  • Continuous Voltage Rating: 8 V to 35 V continuous
  • Maximum Operating Current: 340 mA at 12 V, 160 mA at 24 V
  • Maximum Standby Current: 160 mA at 12 V, 80 mA at 24 V
  • Charge Fail / Excitation Range: 0 V to 35 V
  • Generator & Mains (Utility)
  • Voltage Range: 15 V to 415 V AC (Phase to Neutral) / 25 V to 720 V AC (Phase to Phase)
  • Frequency Range: 3.5 Hz to 75 Hz
  • Magnetic Pickup
  • Voltage Range: ±0.5 V to 70 V
  • Frequency Input Range: 5 Hz to 10 kHz
   

  Call for Quotefor international purchases!

  $689.99
  DSE7320 MKII | Auto Mains Failure Control Module quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  2 pole | 125 Amps | Automatic Transfer | ATS2PC125-22

  • Manufactured using UL 94V-0 plastics.
  • Electrically operated and mechanically held.
  • Coil operating voltage: 110 / 220 Vac +/- 20%.
  • Monitor Normal & Standby source OV and UV.
  • Compact size, light weight and low power consumption.
  • Adjustable time delay in OFF position when transferring.
  • Designed for cell-phone repeaters, and many industrial and home ATS applications.
  • Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
   

  Call for Quotefor international purchases!

  $1,075.68
  2 pole | 125 Amps | Automatic Transfer | ATS2PC125-22 quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist
• 

  PMI TCS4P125-22 Manual Transfer Switch

  • Manufactured using UL 94V-0 plastics.
  • Electrically operated and mechanically held.
  • Coil operating voltage: 110 / 220 Vac +/- 20%.
  • Monitor Normal & Standby source OV and UV.
  • Compact size, light weight and low power consumption.
  • Adjustable time delay in OFF position when transferring.
  • Designed for cell-phone repeaters, and many industrial and home ATS applications.
  • Electrically or manually operated, mechanically held contacts – (Open Transition) with adjustable time in neutral.
   

  Call for Quotefor international purchases!

  $1,141.87
  PMI TCS4P125-22 Manual Transfer Switch quantity
  Add to cart
  Add to Wishlist

  Add to Wishlist